|
|
|
Carbon Dioxide - CO2
Carbon dioxide measurement for combustion efficiency plant applications
Your search for carbon dioxide has brought you to LAND
Refer to the Product Range table below to select the product most suitable to your application.
LAND has a comprehensive range of carbon dioxide monitors and analysers for combustion efficiency applications. LAND can supply both portable and continuous carbon dioxide monitors and analysers, for low and high temperature flue gas applications.
Continuous carbon dioxide monitors are available for both boiler and stack mounting, using extractive measurement. |
|
|
Carbon Dioxide Measurement - Product Range
| Product Name |
Lancom |
FGAII |
| Continuous Analyser |
|
 |
| Portable Analyser |
|
|
| Combustion Efficiency |
|
|
| Emissions Compliance |
|
|
| Extractive Measurement |
|
|
| Measurement Range |
0 - 25 % Vol |
0 - 3 % Vol upto
0 100% Vol |
| Flue Gas Temperature Range |
up to 600°C
(Standard Probe) |
up to 1700°C |
| Product Approvals |
TÜV Tested |
TÜV, UK MCerts |
| Other Gases Measured |
O2, NO, NO2, NOX, H2S, CXHY, SO2, CO |
O2, NO, NO2, NOX, SO2, CO |
Lancom III - Portable Combustion and Emissions Analyser for Carbon Dioxide
The Lancom III is a compact, portable combustion and emissions analyzer for checking or testing a boiler system or pollutant process. It can measure Carbon Dioxide (CO2) plus up to 8 other gases simultaneously and a total of 17 different parameters. It is lightweight (about 6 kg / 15 lb) and is easy to carry around any plant. >>>
FGAII - Continuous, Extractive, Stack Gas Emissions Analyser for Carbon Dioxide
The FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of Carbon Dioxide (CO2) plus up to 6 other gases in a single compact unit. The gas sampling is provided by the ChillerProbe - Advanced Stack Gas Sampling System >>>
FGA 900 Series - Continuous, Extractive Combustion Analyser
The FGA 900 series of combustion efficiency monitors use dual sensor technology to measure the levels of Carbon Monoxide (CO) and Oxygen (O2) to calculate Carbon Dioxide (CO2). >>>
| Measurement Techniques |
|
| In-situ measurement |
The sample gas is measured at the installation point; where a fast response measurement is normally required e.g. combustion control applications . The measurement can normally be termed hot and wet. |
| Extractive measurement |
The sample gas is removed from the process stream, and transported to a separate analyser system, The measurement can normally be termed cooled and dry. |
|
|
|
|
