|
|
|
Carbon Monoxide - CO
Carbon monoxide measurement for combustion efficiency plant and environmental emissions monitoring applications
Your search for carbon monoxide has brought you to LAND.
Refer to the Product Range table below to select the product most suitable to your application.
LAND has a comprehensive range of carbon monoxide monitors and analysers for combustion efficiency and emissions monitoring applications. LAND can supply both portable and continuous carbon monoxide monitors and analysers, for low and high temperature flue gas applications.
Continuous carbon monoxide monitors are available for both boiler and stack mounting, using either in-situ or extractive measurement techniques. |
|
|
Carbon Monoxide Measurement - Product Range
| Product Name |
Series 9000 |
Lancom |
FGA 900 Series |
FGAII |
| Continuous Analyser |
 |
|
|
|
| Portable Analyser |
|
|
|
|
| Combustion Efficiency |
|
|
|
|
| Emissions Compliance |
|
|
|
|
| In-Situ Measurement |
|
|
|
|
| Extractive Measurement |
|
|
|
|
| Measurement Range |
0 - 10,000 ppm |
0 - 2 % Vol up to
0 - 10%. |
0 - 50 up to
0 - 2000 ppm |
0 - 10 ppm up to
0 - 40, 000 ppm |
| Flue Gas Temperature Range |
up to 370 °C |
up to 600°C
(Standard Probe) |
up to 1700°C |
up to 1700°C |
| Product Approvals |
- |
TUV Tested |
US-EPA, TÜV, UK MCerts |
US-EPA, TÜV, UK MCerts |
| Other Gases Measured |
- |
O2, NO, NO2, NOX, H2S, CXHY, SO2, CO2 |
O2, NO, NO2, NOX |
O2, NO, NO2, NOX, SO2, CO2 |
Series 9000 - Continuous, in-situ Carbon Monoxide (CO) Monitors
These carbon monoxide (CO) monitors are designed to provide the operator with a fast response measurement, essential to the efficient combustion control of any boiler system. >>>
Lancom III - Portable Combustion and Emissions Analyser for Carbon Monoxide (CO)
The Lancom III is a compact, portable combustion and emissions analyzer for checking or testing a boiler system or pollutant process. It can measure Carbon Monoxide (CO) plus up to 8 other gases simultaneously and a total of 17 different parameters. It is lightweight (about 6 kg / 15 lb) and is easy to carry around any plant. >>>
FGA 900 Series - Continuous, Extractive Carbon Monoxide (CO) Monitor
The FGA 900 series of combustion efficiency monitors use dual sensor technology to measure the levels of Carbon Monoxide (CO) and Oxygen (if required) in a single compact unit. >>>
FGAII - Continuous, Extractive, Stack Gas Emissions Analyser for Carbon Monoxide (CO)
The FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of Carbon Monoxide (CO) plus up to 6 other gases in a single compact unit. The gas sampling is provided by the ChillerProbe - Advanced Stack Gas Sampling System >>>
| Measurement Techniques |
|
| In-situ measurement |
The sample gas is measured at the installation point; where a fast response measurement is normally required e.g. combustion control applications . The measurement can normally be termed hot and wet. |
| Extractive measurement |
The sample gas is removed from the process stream, and transported to a separate analyser system, The measurement can normally be termed cooled and dry. |
|
|
|
|
