|
|
|
|
|
|
|
|
|
|
Oxygen, Oxygen Analyser, Oxygen Probe
Flue gas oxygen measurement for combustion plant applications
Your search for oxygen, oxygen analyser or oxygen probe has brought you to LAND.
Refer to the Product Range table below to select the product most suitable to your application.
LAND has a comprehensive range of both oxygen analysers and oxygen probes for combustion efficiency applications, plus oxygen measurement correction and normalisation for environmental emissions monitoring.
LAND can supply both portable and continuous oxygen probes and analysers, for low and high temperature flue gas applications.
Continuous oxygen analysers and probes are available for both boiler and stack mounting, using either in-situ or extractive measurement techniques. |
|
|
Oxygen Measurement - Product Range
| Product Name |
Genesis |
Lancom |
FGA 900 Series |
FGAII |
| Continuous Analyser |
 |
|
|
|
| Portable Analyser |
|
|
|
|
| Combustion Efficiency |
|
|
|
|
| Emissions Compliance |
|
|
|
|
| In-Situ Measurement |
|
|
|
|
| Extractive Measurement |
|
|
|
|
| Measurement Range |
0 - 25 % Vol. |
0 - 25 % Vol. |
0 -5 to 0 - 25% |
0 -5 to 0 - 25% |
| Flue Gas Temperature Range |
up to 1250°C |
up to 600°C
(Standard Probe) |
up to 1700°C |
up to 1700°C |
| Product Approvals |
TÜV |
|
US-EPA, TÜV, MCerts |
US-EPA, TÜV, MCerts |
| Other Gases Measured |
|
CO, NO, NO2, SO2, H2S, CxHy, CO2 |
CO, NO, NO2, NOx, |
CO, NO, NO2, NOx, SO2, CO2 |
Genesis - Continuous, In-situ, Oxygen Analysers, Probes and Systems
Genesis is a range of flue gas oxygen probes and analysers developed specifically for combustion analysis and control applications. Unrivalled flexibility and ease-of-use enables the Genesis oxygen analyser systems range to meet all process requirements. >>>
Lancom III - Portable Combustion and Emissions Analyser for Oxygen
The Lancom III is a compact, portable combustion and emissions analyzer for checking or testing a boiler system or pollutant process. It can measure Oxygen plus up to 8 other gases simultaneously and a total of 17 different parameters. It is lightweight (about 6 kg / 15 lb) and is easy to carry around any plant. >>>
FGA 900 Series - Continuous, Extractive Oxygen Monitor
The FGA 900 series of combustion efficiency monitors use dual sensor technology to measure the levels of Oxygen (O2) and Carbon Monoxide (if required) in a single compact unit. >>>
FGAII - Continuous, Extractive, Stack Gas Emissions Analyser for Oxygen
The FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of Oxygen plus up to 6 other gases in a single compact unit. The gas sampling is provided by the ChillerProbe - Advanced Stack Gas Sampling System >>>
| Measurement Techniques |
|
| In-situ measurement |
The sample gas is measured at the installation point; where a fast response measurement is normally required e.g. combustion control applications . The measurement can normally be termed hot and wet. |
| Extractive measurement |
The sample gas is removed from the process stream, and transported to a separate analyser system, The measurement can normally be termed cooled and dry. |
|
|
|
|
|
|
 Oxygen, Oxygen Probe, Oxygen Analyser - Flue gas oxygen measurement for combustion plant applications
Copyright © 1998-2006 Land Instruments International. All rights reserved. Combustion Site Map Information updated:
22-Aug-2006
| |
|
|
|
|
|
|
|
