Stack Gas Emissions Analysers
LAND has a range of stack gas emissions analysers suitable for measuring a wide range of pollutant gases. These analysers are for stack emissions monitoring of CO, O2, NO, NO2, NOx, SO2, SO3 & CO2 in flue gas.
These gas analysers can operate stand-alone or form part of an automated measurement system (AMS) or continuous emissions monitoring system (CEM).
| Product Name | FGA II | FGA 900 Series |
Genesis Oxygen Analyser Systems |
Lancom 200 |
|---|---|---|---|---|
| CO ranges (ppm) |
0 - 10 up to 0 - 40, 000 |
0 - 50 up to 0 - 2, 000 |
- | - |
| O2 (dry) ranges (Vol. %) |
0 - 5 up to |
0 - 5 up to 0 - 25 | - | - |
| O2 (wet) ranges (ppm) | - | - | 0 - 5 up to 0 - 25 | - |
| NO ranges (ppm) |
0 - 10 up to 0 - 50, 000 |
0 - 50 up to 0 - 2, 000 |
- | - |
| NO2 ranges (ppm) |
0 - 10 up to 0 - 1, 000 |
0 - 50 up to 0 - 200 |
- | - |
| NOx ranges (ppm) |
0 - 10 up to 0 - 50, 000 |
0 - 50 up to 0 - 2, 000 |
- | - |
| CO2 ranges (Vol. %) |
0 - 3 up to 0 - 100 |
- | - | - |
| SO2 ranges (ppm) |
0 - 10 up to 0 - 10, 000 |
- | - | - |
| SO3 ranges (ppm) | - | - | - | 0 - 50 |
| Max. No. of Gases | 7 | 4 | 1 | 1 |
Continuous Emissions Monitoring System Backup
The system is a compact unit, which has permanent connection into the sample system of the CEM. The switchover from the CEM to the Back-up system only takes a matter of minutes. Switchover is a simple manual operation, with automatic indication to the data recording system. Where a LAND Data Acquisiton System (DAS) is being used, it will automatically acknowledge the switchover and continue with seamless data logging, the change in source of data being captured in the event log.
FGA 900 Series - Range of Stack Gas Emissions Analysers
The FGA 900 series of stack gas emissions analysers use dual sensor technology to measure the levels of up to 4 pollutant gases in a single compact unit.
FGA II - Stack Gas Emissions Analyser
The FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of up to 7 gases in a single compact unit. The gas sampling is provided by the ChillerProbe - Advanced Stack Gas Sampling System
ChillerProbe - Advanced Flue Gas Sampling System
The ChillerProbe™ combines a high performance heated filter unit, with an advanced sample cooler to clean and dry the flue gas right at the sampling point.
