Combustion & Environmental Monitoring
Company
Stack Gas Emissions Analysers
LAND has a range of stack gas emissions analysers suitable for measuring a wide range of pollutant gases. These analysers are for stack emissions monitoring of CO, O2, NO, NO2, NOx, SO2, SO3 & CO2 in flue gas.
These gas analysers can operate stand-alone or form part of an automated measurement system (AMS) or continuous emissions monitoring system (CEM).
| Product Name | FGA II | FGA 900 Series | Genesis Oxygen Analyser Systems | Lancom 200 / Model 440 |
|---|---|---|---|---|
| CO ranges (ppm) | 0 - 10 up to 0 - 40, 000 | 0 - 50 up to 0 - 2, 000 | - | - |
| O2 (dry) ranges (Vol. %) | 0 - 5 up to | 0 - 5 up to 0 - 25 | - | - |
| O2 (wet) ranges (ppm) | - | - | 0 - 5 up to 0 - 25 | - |
| NO ranges (ppm) | 0 - 10 up to 0 - 50, 000 | 0 - 50 up to 0 - 2, 000 | - | - |
| NO2 ranges (ppm) | 0 - 10 up to 0 - 1, 000 | 0 - 50 up to 0 - 200 | - | - |
| NOx ranges (ppm) | 0 - 10 up to 0 - 50, 000 | 0 - 50 up to 0 - 2, 000 | - | - |
| CO2 ranges (Vol. %) | 0 - 3 up to 0 - 100 | - | - | - |
| SO2 ranges (ppm) | 0 - 10 up to 0 - 10, 000 | - | - | - |
| SO3 ranges (ppm) | - | - | - | 0 - 50 |
| Max. No. of Gases | 7 | 4 | 1 | 1 |
 |
Stack Gas Emissions AnalyserFGA II - Stack Gas Emissions AnalyserThe FGAII stack gas emissions analysers use advanced dual sensor technology to measure the levels of up to 7 gases in a single compact unit. The gas sampling is provided by the ChillerProbe - Advanced Stack Gas Sampling System |
 |
Range of Stack Gas Emissions AnalysersFGA 900 Series - Range of Stack Gas Emissions AnalysersThe FGA 900 series of stack gas emissions analysers use dual sensor technology to measure the levels of up to 4 pollutant gases in a single compact unit. |
 |
Advanced Flue Gas Sampling SystemChillerProbe - Advanced Flue Gas Sampling SystemThe ChillerProbe™ combines a high performance heated filter unit, with an advanced sample cooler to clean and dry the flue gas right at the sampling point. |
 |
CEMs Backup SystemContinuous Emissions Monitoring System BackupThe system is a compact unit, which has permanent connection into the sample system of the CEM. The switchover from the CEM to the Back-up system only takes a matter of minutes. Switchover is a simple manual operation, with automatic indication to the data recording system. Where a LAND Data Acquisiton System (DAS) is being used, it will automatically acknowledge the switchover and continue with seamless data logging, the change in source of data being captured in the event log. |
 |
Monitoring SO3 for Process ControlSulphur Trioxide SO3 / TRI Emissions AnalysersMonitor the levels of SO3 through the periodic checking of the sulphuric acid dewpoint temperature. |
Contact us...
Select the most convenient distributor or LAND office using the dropdown menu below:
Contact our offices / distributors
* denotes a Land office in the country
Register as a user
Become a registered user at the Land website and get access to online training and ticket based support for our products.
Infrared Temperature Measurement
Visit our infrared website for a range of non-contact infrared temperature measurement products, process thermal imaging, fixed spot pyrometers and portable spot thermometers.
 |
Translate Page |
|
|
