Lancom III - Portable Combustion and Stack Emissions Gas Analyser




Search Combustion & Environmental Monitoring Products Request More Information Customer Services \| Custom Solutions \| Site Validation \| Quality \| Product Approvals \| Training \| Support Combustion Monitoring \| Dust & Opacity \| Stack Emissions \| Portable Gas Analysers \| Coal Fire Detection \| Turbine Blade Monitoring Latest News \| Events & Exhibitions \| Product Releases Information For Download Our Offices \| Europe, Africa, Asia & Australasia \| USA, Canada & Caribbean \| Mexico, South & Central America Land Instruments International \| Infrared Temperature Measurement \| Combustion & Environmental Monitoring \| Combustion Site Map

Portable Gas Analyser

Need more information?

Lancom III

Combustion and Stack Emissions Monitoring

The Lancom III is a compact, portable combustion and emissions analyser for checking or testing a boiler system or pollutant process.

What happens when you drop a Lancom III ?
. . . see the video to find out

It forms part of the Lancom portable gas analyser range , which includes the Model 220, a sulphuric acid dewpoint temperature and SO₃ analyser.

The Lancom III is now firmly established at the forefront of portable gas analyser technology. It has the capability to monitor up to 9 different gases, and a total of 17 measurement parameters simultaneously.

The Lancom III offers the best accuracy available from a portable gas analyser, achieved by using an advanced sample conditioning system. It has the features and options you would expect from a leading gas analyser, plus many which single it out as being the most robust, versatile and complete portable gas analyzer currently available.

Gases Measured
	Carbon Monoxide (CO low range)
	Carbon Monoxide (CO high range)
	Carbon Monoxide (Hydrogen compensated)
	Oxygen (O2)
	Carbon Dioxide (CO2)
	Nitric Oxide (NO)
	Nitrogen Dioxide (NO2)
	Sulphur Dioxide (SO2)
	Hydrogen Sulphide (H2S)
	Hydrocarbons (CxHy)
	Nitric Oxides (NOx) - calculated where NO₂ sensor not fitted

portable gas analyser for combustion and emissions monitoring - Lancom III

Lancom III portable gas analyser in use

Quick Links

Insight Data Analysis Software

Gas Sample Probes

Lancom 200 Portable Acid Dewpoint Monitor

Portable Gas Analysers - Overview

Further Information

	English - 363KB
	Last Modified (21/09/06)

	Italiano - 347KB
	Last Modified (27/09/06)

	Français - 366KB
	Last Modified (27/09/06)

	Chinese - 402KB
	Last Modified (17/10/06)

Click here for our complete range of product and application support information.

Portable Gas Analyser range

Gas Selection	Max. No. per analyser	Emissions	Combustion	Options	Model Name
CO, O2, NO, NO2, CO2, SO2, H2S, CxHy, NOx	9 (minimum of 3)	Y	Y	Customer selectable	Lancom III
SO3, Sulphuric Acid Dewpoint Temperature	2	Y	Y	None	Model 220

Key Features

	Up to 9 simultaneous gas measurements - user selectable
	Monitoring of up to17 measurement parameters - one instrument to meet all requirements
	Weighs only 6 kg / 13 lb - easily carried around plant
	Robust, industrial design - for daily use in the harshest plant environments
	Integral printer - instant record of measurement readings
	Wake and Sleep, semi-continuous operation mode - for periodic unattended operation
	Range of user selectable options - ideally matched to application requirements
	Data acquisition & analysis software - capture, manipulate, and report data on your PC
	Simple field upgrade - add features and options as and when required
	Meets US EPA CTM 034 reference method - report generation to recognized standards

Measurement Components
Sensor	Standard Range	Max. Range ^#	Accuracy	Resolution
Oxygen, O₂	0 to 25.0% Vol.	0 to 30.0 % Vol.	±1 %	±0.1% Vol
Carbon Monoxide, CO (low)	0 to 2 000 ppm	0 to 10 000 ppm	±2 %*	±1 ppm
CO (H₂) compensated	0 to 2 000 ppm	0 to 4 000 ppm	±2 %*	±1 ppm
Carbon Monoxide, CO (high)	0 to 4 %	0 to 10%	±2 %*	±1 ppm
Sulphur Dioxide, SO₂	0 to 2 000 ppm	0 to 5 000 ppm	±2 %*	±1 ppm
Nitric Oxide, NO	0 to 1 000 ppm	0 to 5 000 ppm	±2 %*	±1 ppm
Nitrogen Dioxide, NO₂	0 to 100 ppm	0 to 1 000 ppm	±2 %*	±1 ppm
Hydrogen Sulphide, H₂S	0 to 200 ppm	0 to 1 000 ppm	±2 %*	±1 ppm
Carbon Dioxide, CO₂**	0 to 25.0% Vol.	-	±0.5 % Vol.	±0.1% Vol.
Hydrocarbons, CxHy	0 to 5 % Vol. (Application dependent)
Flue Gas Temperature	Measured 0 to 1000 °C (± 5 °C) / -5 to 1832 °F (± 41 °F)
Ambient Temperature	Measured
Draft	±51cm / 20 in Water Gauge***
Flow (velocity)	1 to 50 m/s
Note: Special ranges are available
* Calibration per CTM034 or Land Factory procedure True measurement if sensor fitted (calculated if not) * Reduced to ±26 cm / 10" Water Gauge when used with flow probe # Operating at maximum possible range may affect sensor life and accuracy

Combustion & Environmental Calculations The Lancom III portable gas analyser can provide the following information:
	Combustion efficiency
	Loss
	Excess Air
	CO2 reading (where no sensor fitted)
	Oxygen normalization
	Total NOx
	Wet or dry basis
	Automatic conversions - ppm, mg/m³ , lb/mmBtu, ng/J

	Standard Features These items come as standard with all instruments:
		Standard Sample Probe
		Built-in Thermal Printer
		Data Logging
		RS 232 or RS 422 Serial Communications Interface
		GASS Freeware - for remote upgrade and diagnostics
		Carrying Case

	The user selects which gases and options are required

Lancom III portable gas analyser

Portable Gas Analyser with integral printer

Integral printer gives instant records

Portable gas analyser with easy-to-use key panel

Ergonomic front panel for simple operation

	Options and Accessories
		Draft Measurement - internal stack pressure in hPa or inches water gauge
		Flow Measurement - flue gas velocity, flow rate and mass emissions rate
		Smoke Measurement - readings to Bacharach smoke scales
		Range of Gas Sample Probes - Smoke, Flow, DrySampler and High Temperature*
		Insight Data Acquisition Software system - simple-to-use Windows^TM reporting software
		Analogue outputs (12 current loops, independently user configurable)
		Wake and Sleep facility (Semi-continuous monitoring) - cyclical measurement
		Dual language display options - English, French, German, Italian, Spanish & Polish

*US Patent No. 6782767

Versatile

The Lancom III portable gas analyser has the flexibility to meet all measurement requirements in a single instrument.
The user simply selects the gas types and options (from an extensive list) that are required for their specific application.
Uniquely, the Lancom III gas analyser can be upgraded in the field by remote communications, where future changes in application requirements arise.
There is no need to return the instrument to the factory.

Data Logging and Analysis

The Lancom III portable gas analyser has fully in-built, data capture and storage of measurement data, plus a serial port to download the data to a Laptop PC or similar.

Insight is a dedicated data acquisition and analysis software that is specifically designed for use with the Lancom III portable gas analyser. It allows data capture, storage, analysis and presentation of measurement information in a simple Windows™ based program, which runs on any PC or laptop computer – the ideal reporting tool.

Robust yet lightweight

The Lancom III portable gas analyser weighs only 6 kg / 15 lb, and can easily be carried around any plant. The compact design ensures that access to remote locations via ladders or gantry work is no problem. It is highly robust and ideal for daily use in harsh industrial environments.
Despite it’s compact size it has on-board battery power, which can provide up to 8 hours of operation where required.

If you would like more detailed product information please use the Further Information form.