Right Angle Mounting Plate
The right angle mounting plate is a simple design intended
for basic LSP linescanner head mounting.
It is pre-drilled to accept either the basic mounting plate or
the water cooled, air purged base plate. |
|
|
Basic Mounting Plate
The basic base plate provides a quick release mounting arrangement for the LSP linescanner head, making realignment a simple and easy operation in light industrial applications. |
|
|
Water Cooled, Air Purged Base Plate
The water cooled, air purged base plate is used in applications where an LSP is to be installed into environments where ambient temperatures are in the range 60 to 100°C/140 to 212°F.
This is ideally suited to general industrial applications. The air purge facility should be utilised where the operating environment is dusty and airborne particles could contaminate the scanner viewing window. |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
Water Cooled, Air Purged Base Plate with Sides
The water cooled, air purged base plate with sides is used
in applications where an LSP linescanner is installed
in environments where the ambient temperatures are in
the range 60 to 120°C/140 to 212°F, such as steel and
glass plants.
The air purge facility should be utilised where the operating
environment is dusty and airborne particles could
contaminate the scanner viewing window.
This mounting is used in the Floatline assembly and can also
be used with custom, ruggedized enclosures. |
|
|
LSP Floatline Mountings
LSP float line mountings provide protection for the LSP
linescanner, against high ambient temperatures and heavy
contamination associated with glass float line and other similar
environments.
They also give flexibility for alignment when setting up and
rigidity and adjustability during scanner mounting.
This mounting option is used in conjunction with a Float Line Service Panel.
To counter high ambient temperatures, a water-cooling
system is employed.
This requires a constant, clean water supply to be
available. |
|
|
Ruggedized Enclosure
The water cooled, air purged, ruggedized enclosure is specially designed for extremely hostile industrial conditions.
The ruggedized enclosure provides protection for the LSP
linescanner head against high ambient temperatures and heavy environmental
contamination.
Contact LAND for further details. |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
LSP Floatline System Service Panel
The LSP linescanner float line system service panel
provides mains power to the LSP
system, isolation facilities for servicing access and real time
system status information.
The display panel can be supplied with a choice of
languages to suit the local application.
It provides a real-time indication of system status, including:
 |
Power On (24V) - status indication |
| |
Over Temperature - warning indication |
| |
| |
Low Purge Pressure - warning indication |
| |
| |
High Purge Pressure - warning indication |
| |
| |
Shutter Not Open - status indication |
| |
| |
Manual Close - status indication |
| |
Push For Manual Close - manual operation |
| |
|
|
|
LSP Mini Services Panel
The LSP Mini Services Panel provides mains power to all
components of the LSP system, isolation facilities for
servicing access and system status information. It is
primarily utilised when a cable extension is required,
allowing up to 300m/1000ft of additional cable run from
initial 15m/50ft installation point.
|
|
|
Plate Mounted Blower Unit
The plate mounted blower unit provides air to linescanning and thermal systems, where the specified application
requires a controlled, conditioned air source for instrument cooling and/or optical air purging in order to maintain a clear
sight path to the target. |
| |
|
|
|
|
|
|
